10 German Regelbau Bunkers and the Surprising Jobs They Were Built to Do
10 German Regelbau Bunkers and the Surprising Jobs They Were Built to Do
From compact six-man shelters to a night-fighter command centre, these standardised concrete designs reveal how carefully specialised German bunker architecture became during the Second World War.
The word Regelbau refers to a standardised construction design. It does not describe one universal bunker shape. Each number or letter-number designation points to a particular plan and military purpose: housing a small infantry unit, observing a threatened sector, directing a coastal battery, treating casualties or supporting radar and searchlight equipment.
This article examines ten designations that are present in the supplied image JSON: 621, 622, 636, 639, 666, 668, 671, L411A, L480 and L487. Each type has its own section and eight photographs selected from records carrying that exact type label.
Regelbau 621 — The ten-man groupshelter
Regelbau 621 was a permanent Army Gruppenunterstand intended to shelter a ten-man infantry group. Its role was protective rather than primarily offensive: it gave a small unit a covered place to rest, wait, receive orders and remain available within a defended position. In the catalogue of German fortifications it is classed as a standard permanent building (Ständig) and as a groupshelter for ten men.
The plan is notable for its two entrances, an arrangement with practical and protective consequences. The documented internal sequence includes the entrance/combat room, a gas lock and a crew or readiness room. The plan also lists an observation point and an emergency exit arrangement. The two entrances helped prevent the shelter from depending on a single access route; they also made the plan more substantial than a simple one-door shelter.
The specialist record gives approximate external dimensions of 9.70 × 9.80 × 5.10 metres and a standard concrete quantity of about 410 m³. These are plan-reference values, not measurements of every surviving example. The bunker was built to Baustärke B. Some examples had flanking walls with a ringstand; the record notes that in later construction, under pressure of time, the ringstand could be placed separately rather than incorporated into the flank wall.
A useful historical detail is that the design followed a reorganisation of the infantry group from fifteen to ten men. The Lexikon der Wehrmacht notes that the room plan was not reduced proportionally, leaving a comparatively generous nominal volume per person. It also describes the two entrances and later construction variants. Thus, the 621 is more than a generic concrete sleeping room: it is a standardised unit shelter whose design reflects changes in German infantry organisation and the practical demands of permanent coastal positions.
Operationally, a 621 allowed infantry personnel to remain protected close to the sector they were assigned to defend. Its crew room could support readiness between periods on observation or fighting duty. It should not be mistaken for a command post or a gun casemate; its defining purpose was accommodation and protection for a ten-man group.
Published plan data: 10 men; approx. 9.70 × 9.80 × 5.10 m; approx. 410 m³ concrete; Ständig, Baustärke B. Local configurations can differ.
Eight photographs tagged “Regelbau 621” in the supplied image collection








Type references: RB621-R.html regelbau_visbunker.asp?modelnr=621 regelbau
Regelbau 622 — The twin groupshelter for twenty men
Regelbau 622 was the larger twin groupshelter, designed to accommodate twenty men. Its German title, Doppelgruppenunterstand für 20 Mann, describes its purpose directly: a protected shelter for two infantry groups. The German Fortifications catalogue also identifies it as a permanent building and lists it as a twenty-man shelter.
The standard arrangement was built around protected access and crew accommodation. The published room schedule identifies an entrance/combat room, gas lock, readiness or shelter room and an observation position. The design could be built with or without an attached Tobruk-style position and could also vary in the arrangement of its flanking features. That is important when comparing photographs: not every 622 should be expected to show the same external outline.
The specialist plan reference gives a footprint of about 12.60 × 11.50 metres and a height of 5.10 metres. It records a concrete requirement in the range of approximately 629–650 m³. The variation is associated with the optional elements and construction arrangement, rather than a single universal finished volume. Its Baustärke B classification places it among substantial permanent structures.
Within a defended position, the 622 provided room for a larger body of infantry than the ten-man 621. Its function was to protect personnel from bombardment and fragments while keeping them close to their assigned defensive sector. An observation point or adjoining open fighting position could support local awareness, but the bunker itself remained fundamentally a shelter, not a self-contained artillery installation.
The number of similar structures recorded by different catalogues varies because their geographic coverage and counting methods are not identical. For that reason, this article avoids treating one database count as a definitive total for all wartime construction. The strongest, well-supported identification is the design's purpose, standard capacity and broad internal arrangement.
Published plan data: 20 men; approx. 12.60 × 11.50 × 5.10 m; approx. 629–650 m³ concrete; Ständig, Baustärke B; optional external variants.
Eight photographs tagged “Regelbau 622” in the supplied image collection








Type references: regelbau_visbunker.asp?id=8 regelbau https://vhm.dk/museerne/bunkermuseet-info-eng/
Regelbau 636 — The coastal-battery command and fire-control post
Regelbau 636 was a command post for an Army coastal battery. Its German designation, Befehlsstand für Heeres-Küsten-Batterie, and its classification as a fire-control post distinguish it from a gun casemate. The bunker did not house the battery's main artillery piece; it provided protected working space for the personnel who observed, calculated, communicated and coordinated the battery's fire.
The recorded room schedule makes the function unusually clear. In addition to an entrance/combat room and gas lock, it includes a close-combat defence room, crew shelter, radio room, heating room, observation room, calculation room and communications room. These spaces formed the practical chain between seeing a target, processing information and relaying the data needed by the gun crews.
The standard plan is substantial: about 18.40 metres long, 15.50 metres wide and 6.20 metres high. The technical record gives approximately 960 m³ of concrete, 48 tonnes of round reinforcing steel and 8 tonnes of profile steel, with a Baustärke B classification. The recorded accommodation was twelve men. These figures describe the documented design, not necessarily every construction encountered in the field.
One interesting detail is that surviving or recorded versions do not always have an identical internal layout. The technical record compares a version at Stützpunktgruppe Søndervig with the original drawing and notes differences in the heating-room and combat-room arrangement. The designation therefore identifies a model family, but a site-specific survey is still needed to describe an individual bunker precisely.
In operation, a 636 was the brain of an Army coastal battery's local fire-control organisation. It linked observation, radio and calculation spaces to the weapons under its command. Its large footprint and unusually varied room programme make sense when the building is understood as a protected control workplace rather than a simple personnel shelter.
Published plan data: 12-person crew; approx. 18.40 × 15.50 × 6.20 m; approx. 960 m³ concrete; 48 t round steel and 8 t profile steel; Ständig, Baustärke B.
Eight photographs tagged “Regelbau 636” in the supplied image collection








Type references: 636 regelbau_visbunker.asp?modelnr=636
Regelbau 639 — The large medical dressing station
Regelbau 639 was a large medical bunker, designated in German as Großer Sanitätsunterstand. It was a protected dressing station for casualties, not a troop sleeping bunker or a combat casemate. Its place in the standard programme reflects the need to provide medical treatment space within fortified areas where artillery and other attacks could make surface facilities vulnerable.
The Lexikon der Wehrmacht describes the 639 as a large troop aid station and gives a working medical team of six, together with accommodation for twenty wounded men in double-tier beds. This points to a role beyond first aid at a small observation position: the bunker was intended to receive casualties, provide protected treatment and hold wounded personnel while onward evacuation was arranged. The Danish technical record, by contrast, lists space for nine men in the bunker. The sources may be describing different personnel categories or plan interpretations, so the figures should not be merged into a single asserted staffing number.
The standard type is a large reinforced-concrete structure. The specialist model record gives dimensions of approximately 14 × 21 × 5.10 metres, Baustärke B and an estimated concrete volume of about 1,360 m³. The Lexikon's separate technical summary gives approximately 1,300 m³ and steel quantities of 50 tonnes of round steel and 21 tonnes of profile steel. These are close but not identical figures. They are best treated as differing published estimates, potentially reflecting plan versions or calculation conventions.
Its internal layout had to serve medical work, rather than merely provide protected accommodation. Medical personnel needed usable working areas, access to casualties, protected circulation and space to keep the station functioning despite attack. The large footprint and high concrete requirement reflect these requirements. It is reasonable to distinguish it from a small dressing station, but the exact equipment and medical services at any one site require local documentation.
During wartime operations, a 639 could act as a casualty-treatment node behind the immediate fighting positions. Its presence shows that a permanent fortification complex needed medical infrastructure as well as weapons and command facilities. The structure is especially valuable to study because its architecture reveals how the German fortification programme attempted to protect the support services required by a garrison.
Published plan data: dimensions approx. 14 × 21 × 5.10 m; approx. 1,300–1,360 m³ concrete in published references; Ständig, Baustärke B. Lexikon der Wehrmacht describes capacity for 20 wounded and six medical staff; the Danish record gives a different personnel figure.
Eight photographs tagged “Regelbau 639” in the supplied image collection








Type references: RB639-R.html regelbau_visbunker.asp?id=65 regelbau
Regelbau 666 — The infantry observation post with a small armoured cupola
Regelbau 666 was an infantry observation bunker equipped with a small armoured observation cupola, the Kleinstglocke. Its purpose was to allow selected personnel to watch important areas from a protected position. Unlike a groupshelter, the design was not primarily intended to accommodate a large unit for extended periods. It was a specialist observation post for sectors where exposure to enemy fire was expected to be particularly dangerous.
The Lexikon der Wehrmacht describes its use by company and battalion commanders, infantry gun platoons or heavy mortar groups in key sectors of the main battle area. The small cupola provided protected observation through armoured viewing instruments; the reference describes three armoured observation telescopes and a periscope for all-round viewing. The arrangement was intended to provide a useful field of view while keeping the observer behind armour and concrete.
The documented internal route included an entrance area, a decontamination niche, gas lock and plan room leading to the observation cupola. The specialist record also lists an open observation feature and an emergency exit arrangement. The cupola is the defining feature, and it is one of the easiest technical clues for distinguishing the 666 from an ordinary personnel shelter.
Published construction figures differ. The Lexikon entry describes 2-metre walls and roof, approximately 370 m³ of concrete and 17 tonnes of round steel. The Danish model record lists approximately 420 m³, dimensions of 11.60 × 7.40 × 6.60 metres (excluding the optional Tobruk) and a three-man crew. These figures should be read as source-specific plan data rather than forced into an artificial exact average.
Operationally, the 666 supplied a protected vantage point for observation and command decisions. Its siting mattered: the German technical description stresses concealment in the terrain so that the cupola and bunker would be difficult for an opponent to identify. It was an observation instrument in concrete, not an artillery casemate and not a general-purpose barracks.
Published plan data: small armoured observation cupola; three-person crew in the Danish record; approx. 370–420 m³ concrete depending on reference; 2-metre roof/walls specified by the Lexikon description.
Eight photographs tagged “Regelbau 666” in the supplied image collection








Type references: RB666-R.html regelbau_visbunker.asp?id=30 regelbau
Regelbau 668 — The compact six-man personnel shelter
Regelbau 668 was a small permanent shelter for six men, known as Kleinstunterstand für 6 Mann. It provided a compact protected space for a small team within a defended position. Its scale made it distinct from the larger ten- and twenty-man groupshelters: it was intended for a smaller crew and a correspondingly more compact internal programme.
The recorded room list includes an entrance/combat room, gas lock, readiness or crew room, observation point and an emergency exit arrangement. The bunker therefore combined basic accommodation with protected access and a limited observation capability. It was not designed as a dedicated battery command post or as a large medical station.
The technical record gives dimensions of approximately 7.65 × 7.65 × 4.40 metres and a concrete requirement of about 210 m³. It is classified as Ständig and Baustärke B. The record lists 23 tonnes of round reinforcement steel and 3.7 tonnes of profile steel, together with armoured components at the entrances. Some examples were built with an attached Tobruk position, but this was not universal; the same type can therefore appear with a different external profile depending on the installation.
Its wartime role was straightforward but important. A six-man team could be housed close to a local defensive task while protected from fragments and attack. The observation feature gave the crew some awareness of the immediate surroundings, while the shelter room supported readiness. A 668 could be one component of a larger strongpoint, but it should be identified by its own six-man shelter plan rather than by general appearance alone.
The German Fortifications database lists the 668 separately as a small six-man bunker and records it as a permanent Heer structure. The Hirtshals Bunkermuseum's interpretation of German standard construction also notes that Regelbau plans differentiated bunkers by specific purposes such as personnel, kitchens and ammunition. The 668 is a clear example of that functional standardisation at the small-unit level.
Published plan data: 6 men; approx. 7.65 × 7.65 × 4.40 m; approx. 210 m³ concrete; Ständig, Baustärke B; optional Tobruk feature on some examples.
Eight photographs tagged “Regelbau 668” in the supplied image collection








Type references: regelbau_visbunker.asp?id=12 regelbau https://vhm.dk/museerne/bunkermuseum-info-eng/
Regelbau 671 — The 120-degree gun casemate
Regelbau 671 was a gun casemate for a medium-calibre weapon on a central pedestal or pivot mounting. Its full German designation describes a Schartenstand für Geschütze auf mittlere Sockellafette with a 120-degree firing sector and no ancillary rooms. The design was therefore a dedicated gun position, not a groupshelter or an artillery command bunker.
The key architectural feature was the large frontal embrasure. The gun room was arranged around the weapon's mounting and firing arc. Ammunition niches were incorporated into the structure, but separate accommodation and ammunition bunkers could be provided elsewhere in the battery. The absence of annex rooms is a defining feature of the standard model.
The Lexikon der Wehrmacht identifies the type for fixed employment of 10.5 cm guns and lists a range of weapons of different national origins that could be installed. It records a horizontal traverse sector of 120 degrees and an elevation range from approximately −8 to +35 degrees. Because of the large opening in the front, the gun room was only partly protected against enemy fire compared with a fully enclosed structure. The source describes ammunition recesses for up to 150 rounds of 10.5 cm ammunition.
The Norwegian Fortidsminneforeningen yearbook reproduces an original technical drawing from the Norwegian Defence Estates Agency archive. It identifies the Regelbau 671 casemate with a 120-degree firing opening for a 10.5 cm K 331 gun, and records that two such casemates were built over guns at Oddane Fort in 1944. The drawing includes both a section and a floor plan at 1:150 scale, making it especially useful for understanding how the gun, embrasure and concrete mass were arranged.
Published concrete and steel quantities are not identical across references. The Lexikon gives approximately 300 m³ of concrete, 14 tonnes of round steel and 3 tonnes of profile steel; the Danish model page gives approximately 310 m³ and different reinforcement quantities. The specialist record lists a standard footprint of around 9.60 × 10.00 × 5.10 metres. As with other Regelbau designs, figures should be compared against the precise drawing version and local build.
In operation, the 671 provided a protected mounting and a defined sector for a medium-calibre coastal or fixed defensive gun. Its open-front design traded some protection for a usable firing arc and a comparatively direct installation of the gun. It is a useful example of how a standard plan integrated an existing artillery weapon into a purpose-built concrete position.
Published plan data: 120° horizontal firing sector; 10.5 cm class weapons; approx. 9.60 × 10.00 × 5.10 m; approx. 300–310 m³ concrete in references; no annex rooms.
Eight photographs tagged “Regelbau 671” in the supplied image collection








Type references: RB671-R.html regelbau atlanterhavsvollen---atlantikwall.pdf regelbau_visbunker.asp?id=46
Regelbau L411A — The 60-centimetre anti-aircraft searchlight shelter
Regelbau L411A was a Luftwaffe bunker for a 60-centimetre anti-aircraft searchlight. Its German designation, Unterstand für Flakscheinwerfer 60 cm, identifies the equipment it was designed to protect and support. It belongs to the specialist group of machinery shelters and searchlight garages, rather than to the Army's personnel-shelter series.
The room schedule explains the practical requirements. It includes a crew/readiness room, gas lock, storage room, garage or equipment shelter, engine room and a space for equipment and fuel. These spaces supported the searchlight and the personnel responsible for moving, maintaining and operating the apparatus. The bunker should not be confused with a gun casemate: its defining task was technical support for illumination equipment used in the anti-aircraft defence system.
The standard plan is recorded at approximately 13.00 × 10.60 × 5.10 metres with about 680 m³ of concrete. The type is listed as Ständig and Baustärke B. The structure could be built with or without a small Tobruk feature. This helps explain why exterior photographs may show differences even when the catalogue designation is the same.
Searchlights were important in night air defence because they could illuminate aircraft and help ground defences acquire or track targets in darkness. The L411A's garage and machinery spaces were therefore part of a technical system: the bunker protected the equipment and its supporting functions, while the searchlight performed its work as part of the wider anti-aircraft network. The exact layout and placement of the operating light should be established from site plans rather than inferred from the bunker exterior alone.
The German Fortifications database independently classifies L411A as a permanent Luftwaffe structure for a 60-centimetre anti-aircraft searchlight. Hirtshals Bunkermuseum also documents the presence of radar and searchlight installations among the surviving components of a German coastal defence complex, providing a museum context for this kind of technical bunker without implying that every surviving searchlight installation is an L411A.
Published plan data: 60 cm anti-aircraft searchlight; approx. 13.00 × 10.60 × 5.10 m; approx. 680 m³ concrete; equipment/fuel, engine, storage and garage spaces; optional Tobruk feature.
Eight photographs tagged “Regelbau L411A” in the supplied image collection








Type references: regelbau regelbau_visbunker.asp?id=23 https://vhm.dk/museerne/bunkermuseum-info-eng/
Regelbau L480 — The Wassermann S radar bunker
Regelbau L480 was a Luftwaffe radar bunker associated with the Wassermann S radar. Both the German Fortifications catalogue and the Danish specialist record identify the design as a radar bunker for this equipment. It was classed as a permanent communications installation (Nachrichtenstand), not a weapons casemate or an ordinary personnel shelter.
The purpose of the building was to provide protected accommodation for the technical and operating functions associated with the radar installation. Radar stations depended on more than the visible antenna: they required protected equipment spaces, personnel working areas, power and communications connections. The bunker formed part of that technical infrastructure. The radar antenna or supporting structure should not automatically be assumed to be contained within the concrete block itself; the exact arrangement depended on the site plan.
The Danish specialist record lists a concrete volume of approximately 1,460 m³ and identifies Baustärke B. It also notes that only four examples are recorded in Denmark in that site's inventory. The German Fortifications catalogue separately classifies L480 as a Wassermann S radar bunker and a permanent Luftwaffe structure. These inventories are useful for type identification, but the Danish count is a regional catalogue figure, not a worldwide total.
One caution concerns equipment precision. The Danish page identifies the Wassermann S installation but marks the exact FuMG model number as unknown in its own equipment field. It is therefore appropriate to describe the type as a Wassermann S radar bunker, but not to assign a more specific radar equipment suffix without a separate site document.
In wartime operation, radar installations contributed to the Luftwaffe's broader air-warning and tracking network. Their value lay in detecting and reporting aircraft movements and passing information through communications channels. The L480's role was consequently technical and informational: it supported radar operations from a protected facility rather than engaging targets directly.
Published plan data: Wassermann S radar installation; Luftwaffe communications class; approx. 1,460 m³ concrete; Ständig, Baustärke B. Exact FuMG suffix is not established by the cited type record.
Eight photographs tagged “Regelbau L480” in the supplied image collection








Type references: regelbau regelbau_visbunker.asp?id=94 https://vhm.dk/museerne/bunkermuseum-info-eng/
Regelbau L487 — The Bertha night-fighter control bunker
Regelbau L487 was designed for the Luftwaffe's night-fighter control system known as Bertha. Its German title describes a position for the evaluation of radio-measuring equipment and fighter control: Stand für Funkmeßgeräte-Auswertung Jägerführung „Bertha“. This is a specialised command and communications bunker, not simply a radar shelter or a gun installation.
The documented room list is unusually extensive. It includes the entrance, gas lock, close-combat defence room, crew room, liaison and radio spaces, ventilation room, latrines and washroom, emergency power, transformer and recooling rooms, a leadership room, fighter-control spaces and equipment-evaluation rooms. The plan therefore integrated communications, power, ventilation and operational decision-making inside one protected building.
The L487's standard dimensions are recorded at approximately 22.10 × 22.90 × 8.60 metres, with about 2,550 m³ of concrete and Baustärke B. Its size was a consequence of its complex technical and command requirements. The model record describes it as a permanent Luftwaffe communications bunker. BunkerArchive independently lists it as a bunker for Bertha night-fighter control and classifies it within the Luftwaffe branch.
Operationally, the L487 provided a protected place where radar-related information could be assessed and used to direct night-fighter activity. Its importance lay in the connection between detection, evaluation and command. A radar antenna elsewhere might gather information, but the L487's distinctive role was the protected command and evaluation function that helped turn information into operational direction.
The Danish specialist inventory records six examples in Denmark and ten in total in its own dataset. Those counts should be read as the database's documented tally rather than an absolute historical census. The same record notes that some dimensions were measured from an existing bunker and that the data collection remains open to correction. This is a useful reminder that even detailed Regelbau documentation can contain provisional measurements.
Published plan data: Bertha night-fighter control/evaluation bunker; approx. 22.10 × 22.90 × 8.60 m; approx. 2,550 m³ concrete; extensive radio, evaluation, command, emergency-power and ventilation rooms; Ständig, Baustärke B.
Eight photographs tagged “Regelbau L487” in the supplied image collection








Type references: regelbau regelbau_visbunker.asp?id=56
How the Ten Regelbau Designs Differ
These ten designs illustrate the breadth of the standardised programme. The labels are not interchangeable: the same reinforced-concrete construction method served very different operational tasks.
| Type | Service | Documented purpose | Key distinguishing feature |
|---|---|---|---|
| 621 | Army | Ten-man groupshelter | Two entrances and a crew readiness room |
| 622 | Army | Twenty-man twin groupshelter | Larger accommodation plan; optional external features |
| 636 | Army | Coastal-battery command and fire control | Observation, calculation, radio and communications rooms |
| 639 | Army | Large medical dressing station | Protected casualty treatment and holding capacity |
| 666 | Army | Infantry observation post | Small armoured observation cupola |
| 668 | Army | Six-man personnel shelter | Compact crew accommodation and protected access |
| 671 | Army | Medium-calibre gun casemate | 120-degree frontal firing sector |
| L411A | Luftwaffe | 60 cm anti-aircraft searchlight shelter | Garage, engine, equipment and fuel spaces |
| L480 | Luftwaffe | Wassermann S radar bunker | Protected radar/communications installation |
| L487 | Luftwaffe | Bertha night-fighter command/evaluation | Extensive communications, control and technical rooms |
About the Photographs
All 80 image records used here were selected from the supplied JSON after the full collection was parsed. The selection contains eight records for each of the ten headings, with unique image URLs and Pinterest pin IDs. Each photograph links to the corresponding Pinterest pin, and the displayed width and height attributes reproduce the supplied JSON dimensions.
The bunker-type captions and group assignments follow the type field in the uploaded image collection. That field is catalogue metadata, not an independently verified archival caption: the underlying photograph's date, exact location, photographer and architectural identification are not established by the JSON alone. For a scholarly identification of an individual structure, compare the image with original plans, site records or a verified museum/archive caption before publishing a more specific claim. No photograph in this article is passed off as a floor plan, wartime image or interior view unless that can be established from its own source record.
Sources Used for Type Identification and Technical Context
The descriptions draw on specialist type records, a German fortification dataset, a museum's historical interpretation, a specialist military-history reference and an academic heritage publication reproducing archival technical material. The two Danish specialist websites are used for selected plan particulars, not as the sole basis for the article.
- German Fortifications — Regelbau dataset. Design names, services, permanent-build classification and catalogue cross-checks for the listed types.
- Vendsyssel Historical Museum — Hirtshals Bunkermuseum. Museum interpretation of German standard construction and the surviving personnel, radar and searchlight installations at Hirtshals.
- Lexikon der Wehrmacht — Regelbau 621. Design development, two-entrance arrangement and construction variants.
- Regelbau.dk — Regelbau 621. Published room schedule and standard-plan dimensions/material estimates.
- Regelbau.dk — Regelbau 622. Twenty-man shelter classification, plan dimensions and optional features.
- German Fortifications — Regelbau 636 type page. Function, service, design date, dimensions and construction schedule.
- Atlantikwall.dk — Regelbau 636. Published room programme and fire-control classification.
- Lexikon der Wehrmacht — Regelbau 639. Medical station function, casualty accommodation and construction summary.
- Regelbau.dk — Regelbau 639. Standard-plan dimensions, construction estimate and crew record.
- Lexikon der Wehrmacht — Regelbau 666. Infantry observation role, small armoured cupola, concealment and technical description.
- Regelbau.dk — Regelbau 666. Room schedule, measurements and the Danish type record.
- Regelbau.dk — Regelbau 668. Six-man shelter classification, plan dimensions and construction particulars.
- Lexikon der Wehrmacht — Regelbau 671. Gun role, firing sector, weapons and ammunition arrangements.
- Fortidsminneforeningen, Yearbook 2016 — “Atlanterhavsvollen / Atlantikwall”. Reproduces a Regelbau 671 type drawing credited to the Norwegian Defence Estates Agency archive and documents a 10.5 cm K 331 installation at Oddane Fort.
- Regelbau.dk — Regelbau 671. Standard-plan dimensions and construction estimates.
- Regelbau.dk — Regelbau L411A. 60 cm searchlight shelter, room schedule, dimensions and equipment support spaces.
- Regelbau.dk — Regelbau L480. Wassermann S radar designation, communications classification and concrete estimate.
- Regelbau.dk — Regelbau L487. Bertha night-fighter control designation, internal room list and standard-plan dimensions.
Comments
Post a Comment